2.2.2 Public Release Latest$$$@JohnSmithCYM JohnSmithCYM released this yesterday$$$ v02.02.02.56$$$ 4f0f0f3$$$This version is based on V2.2.1.60; adding support for the Helio Additive Optimization feature and fixing several known bugs.$$$$$$New Features$$$Helio Additive Optimization Integration (Beta)$$$The latest Studio (V2.2.2) further integrates the Helio Additive optimization feature. The Helio Additive optimization engine performs a thermodynamic analysis of your G-code file and returns an optimized version to reduce potential issues such as warping; adhesion problems; or sagging.$$$$$$Enable/Disable Helio Service:$$$$$$Before using the Helio feature; you need to enable the service. Click the thrid-party management button next to the Slice button; then click Use Now.$$$$$$Review the third-party extension agreement. By clicking Agree and proceed; you accept the terms. In the following popup; review the Helio Privacy Policy. By clicking Agree and proceed; you confirm your acceptance.$$$t$$$Once the popup shows that the Helio third-party service has been successfully enabled; you may close it and start using Helio Additive simulation and optimization. To disable the Helio Additive feature; click Uninstall Helio Additive Extension to remove the service.$$$$$$How to Use the Optimization Feature:$$$$$$Slice your model as usual.$$$Click the Helio Action button next to the Slice button.$$$$$$Switch to the Optimization tab. You can choose whether to optimize outer walls; or open advanced options to set limits for speed; volumetric flow; or the number of optimized layers.$$$Click Confirm and wait for the optimization to complete.$$$Once finished; you can review the optimization results in the sliced model and send it directly to the printer to start printing.$$$$$$?? Thermal Index (TQI) Color Mapping Update$$$$$$Adjusted the TQI colour mapping based on customer feedback.$$$A 50% drop in tensile strength—or entry into the warping-critical zone—maps to -50 TQI.$$$Printable range is +50 to 0 TQI; 0 is the strongest; fastest print (with aesthetic trade-offs).$$$? Current Limitations and Supported Configurations$$$$$$Supported Printers: Bambu Lab X1/X1C/X1E; H2D$$$Coming Soon: A1; P1S; P1P; H2D Pro$$$Supported Filaments:$$$Bambu (13): Bambu PPS-CF; Bambu PPA-CF; Bambu PETG-CF; Bambu PET-CF; Bambu PA6-CF; Bambu TPU 95A HF; Bambu PLA Silk+; Bambu PLA Matte; Bambu PLA Lite; Bambu PLA Basic; Bambu PETG HF; Bambu PC; Bambu ABS$$$Polymaker (5): PolyTerra PLA; PolyLite PLA; PolyLite PETG; PolyLite ASA; PolyLite ABS$$$Fiberon (7): Fiberon PETG-rCF; Fiberon PETG-ESD; Fiberon PET-CF; Fiberon PA612-CF; Fiberon PA6-GF; Fiberon PA6-CF; Fiberon PA12-CF$$$G-code Requirements: G-code must be single-color with sequential; layer-by-layer slicing (multi-color or multi-material is not yet supported).$$$For purchasing add-ons or more support; please see the Helio Additive wiki https://wiki.helioadditive.com/en/bambu-studio or join the Helio Additive Discord.$$$Bug Fixes$$$Fixed an issue where Bambu accounts could not stay signed in under certain conditions. (#7796; #7887; #7851; #7806; #7988; #8067)$$$Fixed an issue where G-code could not be parsed when A1 mini initiated flow ratio calibration in some cases.$$$Updated part of the Turkish translation; thanks to the contribution of @fatih5228 .$$$Added support for multiple icon sizes in the AppImage script; thanks to @mean-ui-thread for the contribution.$$$Fixed a potential crash when loading thumbnails in the timelapse list; thanks to @bytedream for the contribution.

2.2.1.60 Public Release$$$Bug fixed$$$Fixed an issue where auto flow calibration triggered via AMS on P/A-series printers could be incorrectly mapped to the external spool. (#8013; #8011; #8005; #7998)$$$Resolved a startup crash caused by the Scarf Seam parameter in certain filament presets.$$$Corrected the H2S image on the Device-Update page.

2.2.1.60 Public Release$$$Bug fixed$$$Fixed an issue where auto flow calibration triggered via AMS on P/A-series printers could be incorrectly mapped to the external spool. (#8013; #8011; #8005; #7998)$$$Resolved a startup crash caused by the Scarf Seam parameter in certain filament presets.$$$Corrected the H2S image on the Device-Update page.

This is the official public release of Bambu Studio v2.2.0.$$$Bug Fixes$$$Fixed an issue where ‘Online models’ always shows even disabled it in preference. (#7719)$$$Fixed an incorrect color scaling display error of H2D G-code preview in layer-height/flow mode.(#7750)$$$Fixed a support raft interface settings lost issue when filament removed.(#7704)$$$Fixed an issue where support filament menu doesnt show material number and color.(#7637)$$$Fixed a variable height slice error caused by copying object.(#7583)$$$Fix serveral compile issues of flathub; thanks to @hadess for your contribution.$$$Known Issue$$$We have received some reports indicating that Studio was blocked by antivirus software. After confirmation; the issue was found to be caused by the TUTK connection service used by Studio. The cause was a false positive by the antivirus software and not a security issue. TUTK has submitted an appeal to the antivirus vendor and is actively working to resolve the matter.

This is the official public release of Bambu Studio v2.2.0.$$$Bug Fixes$$$Fixed an issue where ‘Online models’ always shows even disabled it in preference. (#7719)$$$Fixed an incorrect color scaling display error of H2D G-code preview in layer-height/flow mode.(#7750)$$$Fixed a support raft interface settings lost issue when filament removed.(#7704)$$$Fixed an issue where support filament menu doesnt show material number and color.(#7637)$$$Fixed a variable height slice error caused by copying object.(#7583)$$$Fix serveral compile issues of flathub; thanks to @hadess for your contribution.$$$Known Issue$$$We have received some reports indicating that Studio was blocked by antivirus software. After confirmation; the issue was found to be caused by the TUTK connection service used by Studio. The cause was a false positive by the antivirus software and not a security issue. TUTK has submitted an appeal to the antivirus vendor and is actively working to resolve the matter.

V2.1.1 is a minor version based on V2.1.0; mainly fixing some issues found in V2.1.0.$$$$$$Improvements$$$Supported for setting a flow ratio for individual object (available in developer mode).$$$Bug Fixes$$$Fixed the issue where the build plate did not heat synchronously with the chamber temperature during calibration in H2D. $$$Fixed the problem of Brim being mistakenly generated outside the build plate area.$$$Fixed the issue of Brim overlapping with Skirt in some cases.$$$Fixed slicing crashes when using support material for certain models with narrow overhangs in normal support mode.$$$Fixed slicing errors for single multi-color part in by-object mode. $$$Fixed the issue where third-party preset synchronization could cause crashes; and also fixed errors in parsing and displaying certain parameters. The corresponding flush temperature parameter option has been temporarily disabled.$$$Fixed several typos and text errors.

V2.1.1 is a minor version based on V2.1.0; mainly fixing some issues found in V2.1.0.$$$$$$Improvements$$$Supported for setting a flow ratio for individual object (available in developer mode).$$$Bug Fixes$$$Fixed the issue where the build plate did not heat synchronously with the chamber temperature during calibration in H2D. $$$Fixed the problem of Brim being mistakenly generated outside the build plate area.$$$Fixed the issue of Brim overlapping with Skirt in some cases.$$$Fixed slicing crashes when using support material for certain models with narrow overhangs in normal support mode.$$$Fixed slicing errors for single multi-color part in by-object mode. $$$Fixed the issue where third-party preset synchronization could cause crashes; and also fixed errors in parsing and displaying certain parameters. The corresponding flush temperature parameter option has been temporarily disabled.$$$Fixed several typos and text errors.

Known issue$$$Incorrect flush parameters in H2D custom filaments: For custom filaments created in versions prior to V2.1.0; the volumetric speed and temperature settings used during filament change flushing may be incorrect. Please update the preset to version 02.01.00.15 to avoid this issue. We will address the remaining related issues in the next version.$$$Feature$$$Added Locked Zag infill pattern; which is a filling structure that balances appearance and strength; consisting of two parts:$$$Skin: Wraps around the models outer contour using Cross Zag texture to ensure surface quality consistent with standard Cross infill; enhancing aesthetic appeal.$$$Skeleton: Utilizes Zigzag texture for the internal structure to increase strength.$$$To address the issue of interrupted infill generation caused by varying density or line width parameters in different regions due to the models contour being segmented; Locked Zag provides four parameters to ensure continuity between different areas when changing the selected density and line width. This is illustrated in the following diagram.$$$t$$$Improvements$$$Optimized the Avoid crossing wall feature : After optimization; some models will have reduced stringing.(#6597)$$$Added printer list search functionality on Windows platform : This feature makes it easier to quickly locate the desired printer.$$$Optimized the extruder movement during timelapse: With this feature; the unnecessary travel and noises from the filament cutter stopper are reduced.$$$Improved computation efficiency in Arachne mode: A new overhang calculation method is implemented which significantly accelerates the wall path generation. (#6634 )Left is V2.1.0 and right is V2.0.3.$$$Added support for printer synchronization for single-nozzle models (including X Series / P Series / A1 Series): With a single click; the selected printer’s model and nozzle information on the device page can be synchronized; helping users quickly start a slicing task.$$$Added support for copying print settings from one object to another.$$$Added parameters for flush and tool change during filament swaps: This includes flush temperature; flush volumetric speed and retraction distance when changing extruders.$$$$$$Optimized the Send print job Dialog:$$$UI optimizations: Adjusted the layout and converted advanced options to segmented buttons; with added nozzle info display.$$$$$$Refined the external spool mapping logic: This change allows mapping when external filament type differs from the slicing filament type; with added confirmation dialog to reduce operation complexity.$$$$$$Improved auto-mapping logic for external spools:When the machine has only external consumables; the slicing consumables can be automatically matched according to the consumable matching rules.(#6534; #6540 ; #6850 ; #6803; #6203)$$$Added support for exporting slicing paths as .OBJ files.$$$$$$New Precise Wall feature (available in developer mode) : This new feature improves dimensional accuracy and inter-layer consistency by adjusting the gap between outer and inner walls. Thanks to OrcaSlicer for the contribution.$$$t$$$Updated retraction parameters for Bambu PLA (excluding AERO and Sup for PLA) and Bambu PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles; reducing stringing and improving print quality on large nozzles.$$$t$$$Adjusted volumetric flow speeds for Bambu PLA Basic; PLA Matte; and PETG HF on H2D models with 0.4/0.6/0.8 mm nozzles.$$$$$$Based on testing; we advanced the fan pre-start time by 2s for PLA and PETG on the A1/A1 mini to improve cooling performance during printing.$$$$$$Added support for slicing multiple TPU models on the same build plate: Multiple TPU materials can now be sliced together on a single plate with pause G-code inserted. All TPUs are mapped to external spools for printing; and the print can be completed by manually changing filaments during the printing process.(#6834)$$$$$$The URL handler now supports opening files from third-party sites with an added confir

2.0.3 Public Release Latest$$$V2.0.3 is a minor release based on V2.0.2; which fixes some issues found in V2.0.2.$$$Bugs Fixed$$$Fixed an issue where printing could not start with AMS in some scenarios.(#6557)$$$Fixed a rendering issue under Windows Remote Desktop (RDP).(#6536)$$$Fixed a crash when generating normal support in certain scenarios.(#6535; #6616)$$$Fixed an issue causing high CPU usage in certain scenarios.(#6562)$$$Fixed a crash that occurred when exiting Studio in certain scenarios.(#6544)$$$Fixed a startup failure issue on Windows 7.$$$Fixed an issue where inserting temperature change commands into Timelapse G-code extended print times in certain scenarios.$$$Fixed an error where printing with support material on the H2D failed in certain scenarios.$$$Fixed an issue filament presets were not refreshed promptly after AMS Sync in certain scenarios.(#6583; #6197; #6511; #6478)$$$Updated some Russian translations; thanks to @AndylgTom for the contribution.$$$You can download the flathub version for Linux from Bambu Studio on flathub$$$The Flathub version is maintained by @hadess. Many thanks to him again for his outstanding work!

Improvements$$$Studio device page now supports filament configuration for P1 Series and X1 Series (X1E excluded) printers when connected to AMS 2 Pro and AMS HT.$$$Firmware requirements:$$$X1 series version 01.09.00.00 or later.$$$P1 series version 01.08.00.00 or later.$$$Studio also supports connecting X1 Series printers via subnet binding (requires X1 series version 01.09.00.00 or later).$$$$$$Refer-https://github.com/bambulab/BambuStudio/releases/tag/v02.00.02.57