Back

UltiMaker
Patches for UltiMaker Cura MSI x64
Windows
10 patches available
UltiMaker Cura is free, easy-to-use 3D printing software trusted by millions of users. Fine-tune your 3D model with 400+ settings for the best slicing and printing results.
UltiMaker Cura MSI x64 Version 5.10.1
Release Date
6/3/2025
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

UltiMaker Cura 5.10.1$$$The new UltiMaker S6 is here$$$Print with the new UltiMaker S6 in Cura from day 1. The UltiMaker S6 is the newest addition to the S series of UltiMaker printers that carries forward the award-winning legacy of the S5; now supercharged with innovations like the UltiMaker Cheetah for up to 4x productivity. Learn more about this printer here.$$$$$$Other improvements:$$$Introduced Visual Intent profiles for PLA and Tough PLA for the UltiMaker S8$$$Introduced High-Speed Intents for ABSR for Method X and Method XL$$$Bug fixes:$$$Updated UltiMaker S8 profiles to significantly improve the quality of PC; CPE; CPE+; PETG; support structures; and dual extrusion prints$$$Support brims no longer listen to the Brim Distance setting; so the brims will always be attached to the support$$$Fixed a bug affecting multi-extruder printers where the initial temperature was not set correctly at the start of a print if all features used an extruder other than T0
UltiMaker Cura MSI x64 Version 5.10.0
Release Date
3/25/2025
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

New features and improvements:$$$The UltiMaker S8 was just announced and is now supported in Cura. The S8 is the newest professional desktop printer in the S series; and it achieves up to 4x the speed of its predecessor while also improving print quality. That is possible thanks to the new UltiMaker Cheetah motion planner and new high flow cores; all of which will be usable at launch with Cura! The introduction of this printer comes with a new Marlin-like Gcode flavor called Cheetah. Learn more about this printer here$$$$$$$$$Support for the 3D SpaceMouse by 3Dconnexion. Commonly used in CAD and 3D design software; a 3D mouse makes working with 3D models more precise and efficient. The SpaceMouse; along with the CadMouse; are a perfect fit for Cura and should help make your 3D printing workflows more efficient; especially when switching between Cura and CAD or design software. A big thanks to 3Dconnexions for helping to make this integration possible! Learn more about the integration here$$$$$$$$$Cloud Printing for Sketch Sprint: Enabled printing over cloud with Digital Factory for Sketch Sprint users.$$$Interlocking Settings: Moved Interlocking settings from Experimental to Dual Extrusion category and placed under Expert setting visibility preset.$$$Build System Upgrade: Upgraded the build system from Conan 1 to Conan 2.$$$Preview Looping: When the last layer is played in the preview; the first layer will now play again instead of stopping.$$$Updated About Page: The About Page now shows the used sources; their licenses; and their versions in a clearer way$$$Flip Y-axis Translate Tool Handle: Added an option to flip the Y-axis translate tool handle in preferences.$$$Rotation by Input & Snap Angle Input: Introduced rotation by input & snap angle input.$$$Improved the speed when interacting with the Settings Visiblity window$$$Purge Lines And Unload Filament Post Processing Script: Added a Purge Lines and Unload Filament Post Processing Script$$$Thingiverse Open in Cura Button Linux Support: Enabled the Open in Cura button from Thingiverse to open files in Linux.$$$Multitool Printer Configuration Options: Introduced 3 new configuration options in machine settings for multitool printers.$$$Search and Replace Post-Processing Plug-In: Significantly improved the Search and Replace post-processing plug-in with features like replacing only the first instance; limiting search to a layer range; and ignoring start-up or ending G-code$$$Enabled Relative extrusion (M82 and M83 commands) for Marlin-flavored GCode;$$$$$$New settings:$$$$$$Overhanging Wall Speeds; now gives you the ability to tune multiple values. Don’t forget to adjust the Overhanging Wall Angle to start using the setting.$$$Minimum Layer Time with Overhang and Minimum Overhang Segment Length: Fine-tune the minimum layer time for overhangs.$$$Inside Travel Avoid Distance: Finetune combing movements.$$$Pressure Advance Factor Setting: New setting for machine definitions.$$$You can now tune the Bottom Surface Skin; like you can tune the Top Surface Skin! You can now tune Extruder; Layers; Line Width; Pattern; Line Directions; Outer Wall Flow; Inner Wall(s) Flow; Flow; Outer Wall Speed; Inner Wall Speed; Skin Speed; Inner Wall Acceleration; Skin Acceleration; Outer Wall Jerk; Inner Wall Jerk; Skin Jerk; and Monotonic Bottom Surface Order$$$Enable/Disable USB Printing: A hidden preference setting to indicate that you are using the printer over USB functionality. This setting lays the groundwork for automatically disabling USB printing in the next release when it’s not being used.$$$$$$Bug fixes:$$$Resolved a crash that occurred when switching materials on Sovol printers; resolves #19978$$$Random Seam no longer favors one side and not is truly random again$$$Reduced the slicing time when no support needs to be generated$$$Fixed a bug where Seam on Vertex with a User Defined seam position was not working correctly; resolves #19945$$$Gcode replacement with a single line of code no longer produce
UltiMaker Cura MSI x64 Version 5.9.1
Release Date
2/19/2025
Bug Fix?
No
Minor Release?
Yes
Patch Notes

New features and improvements:$$$The About Page now shows some of the used sources; their licenses; and their versions in a clearer way. This will be even more complete in Cura 5.10.
UltiMaker Cura MSI x64 Version 5.9.0
Release Date
11/18/2024
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

UltiMaker Cura 5.9.0 Latest$$$@github-actions github-actions released this last week$$$· 16 commits to main since this release$$$ 5.9.0$$$ 18cc068 $$$New features and improvements:$$$Scarf seam settings$$$$$$New settings have been added in experimental that let you turn your Z seam into a scarf seam.$$$$$$Scarf Seam Length Determines the length of the scarf seam; a seam type that should make the Z seam less visible.$$$Scarf Seam Start Height The ratio of the selected layer height after which the scarf seam will begin.$$$Scarf Seam Split Distance Determines the length of each step in the flow change when extruding along the scarf seam. A smaller distance will result in a more precise but also more complex G-code.$$$Outer Wall Start Speed Ratio This is the ratio of the top speed to start with when printing an outer wall.$$$Outer Wall (start) Acceleration This is the acceleration with which to reach the top speed when printing an outer wall$$$Outer Wall End Speed Ratio This is the ratio of the top speed to end with when printing an outer wall.$$$Outer Wall (end) Deceleration This is the deceleration with which to end printing an outer wall.$$$Outer Wall Speed Split Distance This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code$$$$$$Bug fixes:$$$Fixed a crash that would occur when renaming profile names that would result in changing the order of the profiles; resolves #19522$$$Fixed a bug so objects in a 3MF reload in the same position as they were saved again; contributed by @nilsiism$$$Fixed an issue where overhanging walls and walls that were adjacent to overhanging walls were not printed at the correct speed$$$Fixed a bug that prevented the Sync materials with printers page from displaying when accessed immediately after starting Cura or signing in$$$Fixed a bug where reloading an updated model would not update the duplicates of the model on the build plate; resolves #19031$$$Fixed a bug that showed incompatible materials when switching between printers with a different filament diameter.$$$Fixed a bug where tree support in enclosed holes has missing layers$$$Made improvements in the G-codePathModify slot for Engine Plugins; contributed by @ThomasRahm$$$Fixed a bug that prevented changes to the initial layer diameter from being applied properly in tree support; contributed by @ThomasRahm$$$Fixed a rounding issue in the engine math; @0x5844
UltiMaker Cura MSI x64 Version 5.8.1
Release Date
8/29/2024
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

UltiMaker Cura 5.8.1 Latest$$$ 5.8.1$$$Bug fixes:$$$Fixed an issue where materials could not be synced to UltiMaker Printers.$$$If you still run into trouble; please consult this troubleshooting page.$$$Profile Improvements$$$Significant improvements for PVA and TPU 95A profiles for UltiMaker Factor 4
UltiMaker Cura MSI x64 Version 5.8.0
Release Date
8/1/2024
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

New features and improvements$$$New Z Seam Settings$$$$$$New settings have been added that let you tweak how and where the Z seam is placed$$$$$$Z Seam On Vertex allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly$$$Seam overhang angle enables you to select the angle at which Z seams will not be printed on overhangs; resolves #9369$$$Support Z Seam Away from Model and Min Z Seam Distance from Model define where the Z seam is placed on supports$$$Add a heading (10)$$$$$$Try it for yourself with this toast post-it holder.$$$$$$Newly introduced Settings$$$$$$“Support Infill Density Multiplier Initial Layer”; “Raft Infill Overlap Percentage”; Raft Surface Z Offset; and Raft Flow settings to improve dual extrusion rafts$$$“Cooling during extruder switch to define the cooling fan behavior during an extruder switch by defining Unchanged; Only last extruder; All fans$$$Updated the Interleaved Prime Tower with Prime Tower Minimum Shell Thickness so it uses less filament; contributed by @wawanbreton$$$Other Improvements$$$$$$Add printer search bar$$$$$$A search bar has been added to the “Add an offline printer” list; resolves #16716$$$Updated the retract behavior for a nozzle switch to reduce the chance of oozing$$$Updated Insert at Layer Change Post Processing Script so layers can be skipped; contributed by @tastyratz$$$Bug Fixes$$$Add a heading (9)$$$$$$Fixed a bug that caused spiked objects to have missing layers; thanks to @ThomasRahm$$$Updated the text in the Open Universal Cura Project (UCP) file to be more correct$$$Fixed the interpolated values for fan speeds and improved the check for minimum layer time; resolves #5409$$$Fix a bug where material_print_temp_prepend not being disabled; resolves #19204$$$Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y; resolves #19156$$$Fixed a bug where a slice would fail if the overhang angle was set to 90 degrees$$$Fixed a bug where infill lines are going through the model with a certain setting combination; resolves; #18970; contributed by @ThomasRahm$$$Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperatures; contributed by @GregValiant$$$Bugs resolved during the Beta$$$$$$Fixed a bug where gaps would appear in generated tree support; resolves #19442$$$Raft-related values that appeared incorrectly when switching extruders now show the correct values$$$Seam not on Vertex has been fixed for multiple models on the buildplate$$$Exported cura:setting keys in material definitions now correctly shows True instead of yes$$$.makerbot file types are now selected by default when saving those files to the Digital Library$$$For the UltiMaker Method series machines Support Interface; Tower; and Horizontal Expansion settings have been updated.$$$For all UltiMaker Machines the Zseam settings have been updated so they are smartly hidden; except for the visual intents.$$$Printer definitions; profiles; and materials:$$$3$$$$$$Introduced the Ultimaker Method with PLA; PVA; and N12CF profiles and intents$$$Improved dual-support settings for UltiMaker Sline and Method printers$$$Expanded and updated intents for Factor 4$$$Updated CPE and PC settings to improve surface quality for Factor 4$$$Introduced Creality Ender 3 V3 KE; contributed by @vadim-danilchik; @daitj; @VladislavVidenov; @fjventura20$$$Introduced Voron2 StealthChanger 250; StealthChanger 300; and StealthChanger 350; contributed by @TheSin-$$$Introduced K1 Max; contributed by @itay-grudev$$$Introduced Ankermake M5C; contributed by @augustchi$$$Introduced WEEDO F150S; F152S; F370; ME40; ME40 Lite; and X40 V3+; contributed by @WinstonMao
UltiMaker Cura MSI x64 Version 5.7.1
Release Date
4/24/2024
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

Introducing the UltiMaker Factor 4$$$$$$Included support for the new UltiMaker Factor 4; the new 0.6 UltiMaker HT print core; and the new Ultimaker PPS CF material.$$$For an overview of the new features in the UltiMaker Factor 4; please watch our video.$$$$$$Bug fixes:$$$$$$Fixed a bug where support lines were printed multiple times$$$Printer definitions; profiles and materials:$$$$$$Updated ASA; SR30; and Nylon12-CF profiles for MethodX and Method XL Printers
UltiMaker Cura MSI x64 Version 5.7.0
Release Date
4/3/2024
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

Newly introduced Settings$$$$$$Settings that define the raft offset for top; middle and bottom raft layers$$$Brim only on the inside setting; resolves #2853$$$Introduced a new Prime tower type: Interleaved; next to the current Normal; contributed by @wawanbreton$$$Apply Monotonic ordering to the Raft Top Surface$$$Raft Wall Line Count for the Bottom; Middle; and Top of the raft$$$Allowing to define print sequence manually; contributed by @alexandr-vladimirov
UltiMaker Cura MSI x64 Version 5.6.0
Release Date
11/28/2023
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

New features and improvements$$$Introduced the MethodX and MethodXL printers with its materials and the option to write to .makerbot$$$A year after the merger of Ultimaker and MakerBot; we have unlocked the ability for users of our Method series printers to slice files using UltiMaker Cura. As of this release; users can find profiles for our Method X and Method XL printers; as well as material profiles for ABS-R; ABS-CF; and RapidRinse $$$$$$Add a heading (5)$$$$$$Prime tower base settings increase the stability of large prime towers$$$New settings have been released that let you modify the base of your prime tower. The new settings are:$$$$$$Prime Tower Base Size$$$Prime Tower Base Height$$$Prime Tower Base Slope$$$Prime Tower Raft Line Spacing$$$You can modify these settings to help improve the reliability of your prime towers. You can also use them to calibrate how well your prime tower adheres to the build plate for increased print success; or to avoid over-adhesion that may damage your build plate.$$$$$$1$$$$$$The Start and End gcodes now accept variables and math including the variables$$$Cura can now accept more start and end gcodes that include math; for example:$$$$$$G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y-prime_tower_size/2} F6000$$$M109 S{material_final_print_temperature}$$$This hopefully also solves issues like #14111 (comment) and #16012 (comment)$$$$$$Other Improvements$$$$$$Introduced the setting for Raft Line Spacing; but for the prime tower$$$Updated the Support Z Distance to allow for more different values; no longer only multiple layerheights; solves #6105$$$Bug Fixes$$$Fixed a crash for some Linux users when trying to open the file menu$$$Bugs resolved since the Beta Release$$$$$$Introduced Balanced and Solid profiles for 1C extruders to UltiMaker Method X and Method XL$$$Improved self-support for UltiMaker MethodX and MethodXL printers so the support extruder will not be used$$$The prime tower is now always enabled when the second extruder is used for the MethodX and MethodXL printers$$$Updated the default prime tower position so it doesnt prevent slicing for some printers$$$Fixed an issue where raft layers were partially printed$$$Slice information template variables were not available through start-end code formulas$$$Resolved an issue with 100% support roof for tree support; contributed by @ThomasRahm$$$Printer Definitions; and Community Translations$$$Introduced Ender 3 V3 SE; contributed by @dim1triy$$$Updated bridge flows for UltiMaker PLA; TPLA and ABS to address pillowing in AA 0.8 for UltiMaker printers$$$Updated Spanish translation for Lightning infill; contributed by @Pelochus$$$Updated German translation for Laying object flat on buildplate; contributed by @gluetolf$$$Updated Brazilian translations; contributed by @Patola$$$Known Issues$$$The predicted printing time for dual extrusion printjobs on the Method series are deviating from the actual printing time.$$$It’s not possible yet; to use Method series printers with Digital Factory. We hope to resolve this for the next release.
UltiMaker Cura MSI x64 Version 5.4.0
Release Date
7/4/2023
Bug Fix?
Yes
Minor Release?
Yes
Patch Notes

Introduced the new Tree Support contributed by @ThomasRahm$$$Try it for yourself with this dragon pencil cup.$$$$$$Improved slicing time for Tree Support$$$Introduced 10 new settings and updated 2 so anyone can tune the behavior$$$Updated options for Tree Support Rest Preference to be more correct$$$Fixed a bug where Tree Support would generate unsupported islands$$$Fixed a bug where slicing would fail if Preference was set to On Any Flat Surface$$$Fixed a bug where branches were not generated when Support Interface was enabled.$$$Fixed a bug where the Support Overhang Angle caused a crash with Tree Support$$$Fixed a bug where the Support Interface was not correctly generated with Tree Support$$$Changed the order in which the brim is printed so its easier to remove$$$Introduced the Smart Brim setting that changes the order in which the brim lines are printed making them easier to remove. Try it for yourself with this Cura Cookie Cutter.$$$$$$New features and improvements:$$$$$$Updated the UltiMaker logo to reflect the new company logo$$$Added support for the updated mainboard revisions of UltiMaker S3; S5; and S7$$$Introduced Hole Horizontal Expansion Max Diameter so only the expansion of smaller holes can be tuned while leaving larger holes untouched.$$$Introduced Skirt Height setting to make a skirt easier to remove$$$Improved the minimum layer time for printers with multiple extruders.$$$Improved accuracy of when the M104 Hotend Temperature command is added$$$Improved printing order of the prime tower to include a dual brim; primed every layer; and primed before and after the extruder switch.$$$Improved behavior for opening and closing categories when adding a new printer$$$Removed the settings related to Wire Printing since it was broken and barely used.$$$Upgraded PyQt to version 6.4.2 which improves responsiveness in the UI$$$Bug Fixes$$$$$$Fixed a bug where the brim line would not be printed in the same orientation$$$Fixed a bug where models dropped to the buildplate when they were supposed to be floating$$$Fixed a bug where models would overlap if multiple models were loaded at the same time$$$Fixed a bug where an error would be shown too often in One At A Time print sequence$$$Fixed a bug where the message for a new Beta version available would show up during the Beta.$$$Fixed a bug where ESun PLA+ would display unsupported.$$$Fixed a bug where the printjob name was hard to read in darkmode$$$Fixed a bug where the Minimum Layer Time was incorrectly interpolated$$$Fixed a bug where Cura would crash on star-up for some Linux systems because of missing SimpleButton; contributed by @fieldOfView$$$Fixed a bug where the Post Processing Plugin would create extra folders; contributed by @fieldOfView$$$Fixed AppImage Icon for Linux systems; contributed by @leoheck$$$Fixed a bug where the buildplate temperature in the USB printing monitor was not rounded; contributed by @asteroids1975$$$Fixed a bug where retracting for Filament Change was not performed correctly because of an extra /n in the gcode. Contributed by @JuanManuelCuello$$$Fixed a bug where the material estimation would not show currencies correctly. Contributed by @Diegovd$$$Bugs resolved since the Beta Release$$$$$$Fixed a bug where undesirable micro-segments would introduce jagged paths on curved surfaces.$$$Fixed a bug where it was not possible to use custom support and brim meshes$$$Fixed a bug Cura would not start when upgrading from a Cura 5.4 Nightly$$$Fixed a bug where Connect Top/Bottom Polygons would cause a slicing crash$$$Fixed a bug where generic materials were missing for some printers$$$Fixed a bug where Support Horizontal Expansion would be incorrectly applied to tree supports$$$Fixed a bug where nozzles were missing from the Elegoo Neptune 3 Plus. Contributed by @GregValiant$$$Printer definitions; profiles; and materials:$$$$$$Introduced UltiMaker PET CF with Annealing and Engineering intents$$$Updated Infill- and Skin Overlap settings for UltiMaker printers$$$Enabled a modest Support Brim by default f
Interested in automating patching for UltiMaker Cura MSI x64?